Hazet-Werk 4954-2 Betriebsanleitung Seite 18

3. LCD display.
• If the battery is weak, the tester does not activate and the indicator lamp lights up red.
• Energy­saving design: After 1 minute without action, the tester shuts off automatically
to save energy.
• Burn protection: If a test is conducted without the probe touching the fluid, "E­1"
is displayed and the heating process is stopped. This is a safety concept used to
protect the tool.
• If there is no action after the battery is connected, make sure that the battery
connection cable is connected to the correct battery terminal.
Preparing the test fluid
1. Use the syringe
to draw the brake
fluid from the
main cylinder.
18
3
Design and function
2. Transfer the brake
fluid into the test con­
tainer (approx. 25 ml).
Electrical energy may cause serious injuries!
Always wear personal protective equipment!
hazet.com •
^
3. Keep the probe in the
container. Ensure the
correct filling height! If the
brake fluid is under "TO
THE LINE" during the test,
the data are inaccurate.
Please repeat the test with
the correct quantity.
info@hazet.de
]