Installation - Rexing V1P Pro Schnellstartanleitung

4. Installation

Step 1: Install the Dash Cam
Place the 3M tape on the Mount and properly orient the
Mount square to the roof and hood line of the vehicle.
Important! Ensure the T-interlock on the Mount is oriented in
the correct direction.
Firmly press the Mount onto the windshield. Wait at least 20
minutes before mounting the camera.
On the illustration Orient the mount as shown.
Step 2: Insert the Memory Card
The Rexing V1P Pro accepts [Class 10/UHS-1 or higher] Micro
SD memory cards up to 256GB. You will need to insert a
memory card before you can begin recording. Before inserting
or removing a memory card, first ensure you've powered
down the device. Gently push the memory card in until you
hear a click, and allow the pring release to push the card out.
8
Orient the
mount as shown
Press the Power
button to turn the
power off