How To Use - Forch 4641 4 Handbuch

Rotation Angle Measuring Device
ENG
Functional characteristics
1. ± 0,0 ~ 999,0 setting and counted up angle
2. Fine resolution (0,1°)
3. 99 Memory capacity
4. Angle measurements clockwise and counter-clockwise
5. Angle measurements of any lenght
6. Display for battery charge status
7. Automatic power-off
8. Flashing LED alarm indicator
9. Display for the buzzer alarm
LCD-screen
1. Illuminated displays
The red LED indicates a setting angle of more than 100%. The green LED
indicates a setting angle of 90 to 98%. The yellow LED indicates a setting angle
of 80 to 90%.
2. LCD-display
CCW: Display of the angle measurements when the measurement is done
counter-clockwise.
3. Switches
C: ON / SAVE & DELETE
+: Press this button in order to count up the angle measurement.
Upwards: increase value (+)
Downwards: reduce value (-)
M: activate memory modus

How to use:

1. Switch on
Presse „C" in order to switch on the device. The rotation angle measuring device
opens the „setting angle" environment.
2. Restore standard settings
Press 3 sec. onto „C" in order to set back the rotation angle measuring device to
the standard settings.
3. Switch off
The automatic switch-off is done after 2 min. without operation.
4. Delete
Press „C" in order to delete the value displayed and to go back to the pre-set
angle. The rotation angle measuring device stores the displayed value.