Faller 170987 AS186A Bedienungsanleitung Seite 9

Please note!
Based on your work requirements, choose the right air compressor with
̥
the appropriate flow and pressure.
Before commissioning, please check whether the mains voltage matches
̥
the specifications on the device.
Please observe the usual safety precautions when handling electrical
̥
equipment.
Never expose the device to dust, acids, vapors, explosive or flammable
̥
gases or the effects of the weather.
The device may only be used in well-ventilated rooms with a temperature
̥
between +5 ° C and + 40 ° C.
Do not use the device barefoot or with wet hands or feet.
̥
Keep the device away from children. Do not open the device. In case of pro-
̥
blems of a technical nature, please contact an authorized dealer.
If the unit is shut down for a long time, drain the water from the separator
̥
tank. Store the device in well-ventilated and dry rooms.
Operation:
The pressure gauge (d) indicates the working pressure.
̥
Pull the regulator (c) up and turn it clockwise to increase the pressure.
̥
To decrease, pull the regulator (c) up and turn counterclockwise. Do not
̥
try to turn the regulator (c) when it is blocking.
Press the needle (f) on the bottom of the trap to drain water.
̥
Anleitung_Airbrush Compressor_AS186A.indd 9
Please note the attached safety instructions.
EN
9
11.12.18 14:06