ALCIA SoundNET Bedienungsanleitung Seite 6

The red colour on the indicator 4 points out a too higher input level.
In this case, you have to adjust the level 3 until the indicator
turns into green.
3. Make sure that the switches for the channels 8 and 14 are in
the same position.
Each switch can be placed in three different positions, which
correspond to the communicating channels between transmitter
and receiver.
4. Connect the SoundNET receiver to the mains plug and press the
switch 9. Adjust the control 11 for the volume you wish.
5. You can use this system also with headphones. Plug them to the
output 12.
1 2
- 5 -
3