Operation - Velleman DVR16H3 Schnelleinstieg

Record Settings
1. Right-click the screen and enter the admin password.
2. Use the arrow button to select ADVANCED CONFIG.
3. Use the arrow button to select RECORD.
4. Select the record type you want to set (manual, event or timer).
5. In "CHANNEL", select "ALL" to apply the changes to all channels.
6. Alternatively, select "BY CHANNEL" to set the image size, image per second & image quality individually for each channel.
7. Use the arrow button to select GENERAL.
8. Set the image size, images per second (I.P.S.) and image quality.
9. Select APPLY.
Refer to the full user manual on the included CD-ROM for more details.
Audio Playback
Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the quick menu bar (see below).
The current audio channel is indicated in the status bar.
Switch Users
1. The DVR can be accessed as administrator (
2. To switch between users, click on the user icon (
3. Click the key lock icon (
9.

Operation

Display
The following image shows the screen layout.
live audio channel enabled
audio channel disabled
digital zoom on (yellow) / off
LAN connected
no network connection
USB flash drive connected
key lock on
sequence mode
recording mode
administrator logged on
Note that actual screen icons might differ slightly from the ones shown above.
V. 01 – 25/09/2014
) or operator (
or
) and enter the password of the desired profile.
A
B
C
D
DVR16H3
), icons are indicated in the status bar.
) to lock the current session (
system date and time
general system status
available HDD capacity
channel status
timer recording
USB mouse connected
internet connected
hard disk overwrite (default)
PTZ mode
motion mode
alarm
alarm mode
operator logged on
7
).
©Velleman nv