Height Adjustment - ENHANCE Cryogen 2 Handbuch

EN
Placing the bumper plate
Remove the bumper plate located on the bottom of the
stand. Place the bumper plate into the slot.
Controlling fan speed
Use the turn dials to power ON/OFF and control the fan
speed in each zone.
Powering the stand
Connect the USB cable to a USB port on the cooling
stand. Connect the other end of the cable to your
computer's USB port.
Note: Unused port is for data pass-through and is not
intended to support device charging.

Height adjustment

Use the fold out legs to adjust the height.
8