Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OP 9210
VIBRATION PNEUMATIC PULLER FOR EXTRACTION INJECTORS
take a break or carry out other work. Increase tractive force
cautiously by tightening the tie rod nuts or actuating the
hydraulic unit's manual pump.
Your goal is to fully remove the injector from its housing
without damaging the cylinder head and without breaking the
injector, which would leave residues inside the head.
Always work with caution and the necessary patience.
Air Connector
Pressure Regulator
Inclined stop clamp
INCLINED
Werbung
