General Safety Regulations - MAXTOOLS CJS300 Bedienungsanleitung

English
FOREWORD
We thank you for buying this Max Tools quality product. Before using this product,
carefully read these instructions and become acquainted with the safety symbols.

GENERAL SAFETY REGULATIONS

ALSO SEE SAFETY SYMBOLS ON PRODUCTS LABEL:
• Always use jackstands in pairs on hard, level surface capable of sustaining the
load.
• Do not overload jackstand beyond rated capacity.
USE
ALSO SEE SAFETY SYMBOLS ON THE PRODUCTS LABEL:
• Position stands under vehicle at points specified by vehicle manufacturer as
proper load support points.
• To adjust stands: hold control lever up while lifting saddle shaft to desired height.
Push control lever down to lock pawl into teeth located in center column.
• Carefully lower load onto stands.
INSPECTION
• Visual inspection shall be made regularly.
• No modifications shall be made to the product!
GUARANTEE
This product is fully guaranteed against manufacturing defects for a period of 12
months from the date of purchase.
If your product proves faulty during the guarantee period, it should be returned to the
place of purchase together with the original receipt.
4