Felco 880/100-100 Benutzerhandbuch Seite 12

SAFETY MEASURES RELATING TO THE USE OF
THE ACCESSORY
FELCO 880/100-100 and/or FELCO 880/100-150 extension
poless are accessories for professionals, to be used with
electric pruning shears FELCO 801, FELCO 811 or FELCO
820 solely for cutting branches.
FELCO SA shall not be liable for any damage due to
inappropriate use other than that for which the product is
designed.
Further, FELCO SA shall not be liable for damage due to the
use of non-original parts or accessories.
Do not use the FELCO 880/100-100 and/or FELCO 880/100-
150 extension poles if damaged, incorrectly adjusted or not
fully assembled.
The tool attachment system is an area that presents a
pinching hazard.
Insert only electric pruning shears (FELCO 801, FELCO
811 or FELCO 820) in the area for connecting the tool to
the extension poles; otherwise, the pool or the tool may be
damaged.
Do not connect electric pruning shears to the FELCO
880/100-100 and/or FELCO 880/100-150 extension poles if
any of the two inserts (11) are not properly installed or in good
condition.
Use personal protective equipment:
o Protective helmet
o Safety goggles
Refer to the operating manual of the electric pruning shears in
order to understand the materials that may be cut with them.
All the features of the electric pruning shears are also
available when they are connected to the FELCO 880/100-
100 and/or FELCO 880/100-150 extension poles. Please refer
to the operating manual of the electric pruning shears.
The connector of the FELCO 880 cable (power pack) must
not be connected to the extension extension poles while the
electric pruning shears are being fitted to the extension poles
attachment system or removed from it.
Take off the electric pruning shears and disconnect the
extension poles cable connector (6) before any maintenance
or cleaning of the FELCO 880/100-100 and/or FELCO
880/100-150 extension poles, and before any maintenance of
the cutting head of the electric pruning shears (FELCO 801,
FELCO 811 or FELCO 820).
Hold the extension poles firmly, only by the tube (2) and/or the
12 ENGLISH
handle (3), while taking it to the work location and during use.
Always keep the FELCO 880/100-100 and/or FELCO
880/100-150 away from children and minors.
Please refer to the operating manual (FELCO 801, FELCO
811 or FELCO 820) for information about the risks relating to
the electric pruning shears.
Disconnect the electric pruning shears and the cable
connector from the extension extension poles connector
(6) while carrying the FELCO 880/100-100 and/or FELCO
880/100-150 extension poles. Between two cutting locations,
make sure that the FELCO 880/100-100 and/or FELCO
880/100-150 extension poles are placed so that they are not
damaged and do not damage any external element as they
move during any transport.
Do not hold the pruning shears by their handle when they
are connected to the FELCO 880/100-100 and/or FELCO
880/100-150 extension poles. Potential risk of injury.
Make sure that the FELCO 880/100-100 and/or FELCO
880/100-150 extension poles do not fall during use, transport,
maintenance or storage. Potential risk of injury and/or
damage.
Do not use the FELCO 880/100-100 and/or FELCO 880/100-
150 extension poles if the pruning shears are not correctly
connected, or if the closing system (8) is not correctly closed
and locked. Refer to the section "Using the FELCO 880/100-
100 and/or FELCO 880/100-150 extension poles".
If possible, stay on a flat stable surface while using the
FELCO 880/100-100 and/or FELCO 880/100-150 extension
poles.
If you need to work on a ladder, make sure that the ladder is
stable and correctly set up.
Always maintain a distance of at least 40 centimetres
between the cutting head of the pruning shears (FELCO 801,
FELCO 811 or FELCO 820) and any part of the user's body.
Do not knock the electric pruning shears against branches or
other external elements.