GeoSafari Jr. My First Telescope Handbuch Seite 3

Assembling GeoSafari
1. Gently pull the tripod legs apart
as far as they will go.
2. Press down on the center of the
tripod supports until the tripod
locks into position.
3. Turn the vertical lock knob in
the counterclockwise direction
to remove it.
4. Place the telescope over the tripod
mount and line up the holes. Push the
screw through the holes and then
secure it by turning the knob in a
clockwise direction.
Jr. My First Telescope
®
Tripod legs
Center of
the tripod
supports
3