Explanation Of Symbols - Heras sGate serie Installations-Handbuch

Explanation of symbols

Use an open-end wrench
The number specifi es the
insertion size in mm.
8
Use an Allen key
The number specifi es the
insertion size in mm.
8
Use a screwdriver
The symbol specifi es the type of
screw. The number specifi es the
15
size of the screw.
Use a electric screwdriver
The symbol specifi es the type of
screw. The number specifi es the
15
size of the screw.
Use a drill
The number specifi es the drill bit
diameter in mm.
8
Ensure that the specifi ed parts
are level.
Use a brush.
Do not perform the work on
your own.
Use a lifting tool/hoisting
system.
Use a pump.
Use grout.
Follow the instructions on the
package.
sGate overhead track
manual
C
5
Check the distance.
Indoors.
Outdoors.
Use a soldering iron.
Use a grease gun.
Use a cloth and a non-abrasive
cleaner.
This step is optional.
Refer to a different manual.
Refer to the separately included
overview drawing. The letter
indicates the drawing.
EN EN