AmazonBasics HP03 Handbuch Seite 5

Windows¤ Vista and Windows 7
n
1. Click Start > Control Panel > Sound
2. On the Playback tab, choose AmazonBasics Headset and click Set Default.
3. Select the Recording tab, choose AmazonBasics Headset and click Set Default.
4. Click OK to save your changes.
Windows 8
n
1. Go to Start Menu, select Desktop tile
2. On Charms menu, select Settings > Control Panel > Hardware and Sound > Sound
3. On the Playback tab, choose AmazonBasics Headset and click Set Default.
4. Select the Recording tab, choose AmazonBasics Headset and click Set Default.
5. Click OK to save your changes.
Windows 10
n
1. Go to Start > Settings > click on the Personalization icon.
2. Click on Themes on the left side and then select the "Go To Advanced Settings"
link on the right side.
3. On the Playback tab, choose AmazonBasics Headset and click Set Default.
4. Select the Recording tab, choose AmazonBasics Headset and click Set Default.
5. Click OK to save your changes.
Mac OS X
n
1. Open System Preferences and select Sound.
2. Select the Input tab, and then choose AmazonBasics Headset.
3. Select the Output tab, and then choose the AmazonBasics Headset.
4. Close the window.
FCC Statement - This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device
must accept any interference received, including interference caused undesired operation.
The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for
compliance. Such modifications could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement - This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B)
E n g l i s h . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fr a n ç a i s . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
D e u t s c h . . . . . . . . . . . . . . . . . . . . . . . . . . .16
I t a l i a n o . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3
E s p a ñ o l .. . . . . . . . . . . . . . . . . . . . . . . . . .3 0
日本 語. . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 3 7
中文 . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 4 4
Please call 1-866-216-1072 for customer service.
5