Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Place the radiator air bleeder on the
bleeding screw and vent it by one grip –
quick, clean and without tools.
Thanks to its narrow design and its
capacity of 80 ml, you can bleed your
radiators even in small alcoves.
The radiator bleeder is suited for all
types of radiators with a separate
bleeding valve.
Using
1. Place the container with its opening above the radiator
bleeding valve and insert the wrench's square into the
valve.
2. Turn the wrench's square to the left, until the air escapes of
the radiator (max. 2 turns). Allow a little water to pass out.
Then please close the valve by turning the screw to the
right.
3. Empty the collection container. If necessary, fill water into
the heating system after bleeding the radiator. Take care to
the manufacturer's instructions regarding the height of wa-
ter level.
Technical Data
Capacity: 80 ml; Dimensions approx.: W 6 x D 3 x H 10 cm
Design protected by copyright
Instruction Sheet
Radiator Bleeder
Article No. 32 07 05
© Westfalia 05/13
Werbung
