WOODLAND SCENICS THE DEPOT BR5852 Handbuch

THE DEPOT BR5852
The Depot includes one interior light (Warm White), one exterior light (Yellow) and a lighted Street Lamp (Yellow) designed to work with
the Just Plug Lighting System. The Just Plug Lighting System is a complete, quick and easy way to add realism and light to new and
®
existing layouts and other projects. No electrical knowledge or special tools needed. Just Plug and you're done! See the complete Just
Plug Lighting System at woodlandscenics.com.
The lights included with The Depot are run through a Circuit Board. The Circuit Board is located underneath the building. The Roof and
Lighting Raceway Cover are removable to access interior lighting.
INSTRUCTIONS FOR POWERING LIGHTS
JUST PLUG LIGHT HUB (JP5701)
This uses a maximum current of 30mA.
Insert the unplugged end of the Connecting Cable (JP5760) into a
LIGHT Port on a powered Light Hub.
TIP! Extension Cables (JP5761) can be used to extend the reach
of the included Connecting Cable. To use Extension Cables, unplug
Connecting Cable from Power Port (A) on the Circuit Board and insert
the Extension Cable Plug. Then plug the Connecting Cable Plug into the
Extension Cable Port.
ADDITIONAL OPTIONS FOR POWERING LIGHTS
JUST PLUG POWER SUPPLY (JP5770 – JP5773)
This option uses a maximum current of 75mA.
Unplug Connecting Cable from Power Port (A) on the Circuit Board and
insert Power Supply Plug.
MODEL RAILROAD POWER PACK
This option uses a maximum current of 75mA.
Cut off one Plug with wire cutters, strip approximately 1 in of wire and
connect to railroad accessory terminal (per manufacturer instructions).
LED Circuit Board
Circuit Board
PWR IN
Power
Port (A)
OUT 1 OUT 2
(A) Power Port 16-20VAC power source required
Lead-in Wire plugs into Port (A).
(B) LED Ports
Lights plug into Ports (B).
LED
Ports (B)
OUT 3 OUT 4