ION SnapCam LE Schnellstartanleitung Seite 5

• Mode will change in this order: Still/Single > Time Lapse > Video/
Normal.
• Still/Burst and Video/Loop set from Smartphone App SnapCam
LE.
4. Still Capture (Single)
• Power ON SnapCam LE by pressing Power/Mode button.
• Set "Mode" to Still/Single.
• Press Shutter button.
• Double beep indicates shutter release.
5. Video Recording
• Power ON SnapCam LE by pressing Power/Mode button.
• Change Mode to Video/Normal, then press Shutter button
• LED will blink continuously during video recording.
• Single beep means video recording has started.
• Stop video recording by pressing and holding the Shutter button for
2 seconds.
• Double beep sound indicates video recording has stopped.
EN-5