Other Problems; Overcurrent Protection - DESKFIT DF300 Benutzerhandbuch

12. OTHER PROBLEMS

1.Control Panel Problems:
lf the control panel has no response or can't adjust the desk, please contact your point of purchase to replace the
control panel alter confirming the desk is properly connected to power. lf the new control panel works, please contact
us to replace the original control panel. lf the desk still doesn't work, please contact your point of purchase for service
or repair to your unit.
2.Lifting Columns Can't Operate:
lf the desk doesn't work, alter confirming the control panel works properly, please turn the power off, and restart the
system. lf it still doesn't work, please contact your point of purchase for service or repair to your unit.

3.Overcurrent Protection:

In addition, an over-current protection mode has been also programmed in this system. When the electricity is over
rated specification, the system will enter this mode. The desk will lower approximately 30mm and stop with the height
displayed if the mode activates. This is only an introduction of the function of the downward movement. No trouble
shooting is required when this happens.
36