FAME AG-40A Bedienungsanleitung Seite 16

Status
Power on
Bluetooth on
Bluetooth Play
Bluetooth Pause
Power adapter connected
Charges
Load Volkommen
Connecting a guitar:
1. turn on the power switch, the LED will light up now
2. connect your guitar with a suitable guitar cable
Use the GUITAR Volume and MASTER Volume knobs to adjust the volume to the desired level.
Connecting a microphone:
1. connect your microphone to the MIC input of the AG-40A using a microphone cable with 6.3mm
stereo jack.
Use the MIC Volume and Master VOlume knobs to set the desired microphone volume.
3. adjust the ECHO controller as required
Connection of another AG-40A
1. only another AG-40A(Amp2) can be connected to the AMP OUT of an AG-40A (Amp1) via its
corresponding AMP IN via a 3.5mm stereo mini jack. The amplifi er (Amp2) connected in this way is
controlled by this AG-40A(Amp1), the Volume, EQ and
Effect settings of Amp1.
Tabelle 1
Power display (Red)
Lights up according to the
state of charge, Table 2
Tabelle 2
Red and green LEDs light up
Red LED lights up
Green LED lights up
Bluetooth Display (Blue)
off
Flashes quickly
Flashes slowly
Lights up continuously