Cleaning And Maintenance - Thermrup HB619U Gebrauchsanweisung

4.2 mains operation
· Connect the extension cable to the
connection cable of the belt.
· Insert the USB plug of the extension cable
into the USB charger.
· Press the power button of the controller for
approx. 2 seconds to switch on the controller. Then press the power button
briefly (if necessary several times) to set the desired temperature level (1-2-3,
red -green-blue).
· Press the power button for approx. 2 seconds to switch off the controller.
· After use, remove the extension cord from the charger.
*** Please use only the supplied charger. ***

5. Cleaning and maintenance

· Before cleaning, disconnect the heat belts from the
power bank or power supply. Take the heating pad and
the cable out of the belt.
· Never use aggressive cleaning agents or strong brushes.
· The heat belt can be washed in the washing machine up to 45 ° C in a washing
bag or supplied washing bag.
· The thermal belt must not be dried or ironed in a dryer.
6. Disposal
This product must not be disposed together with the domestic waste. All users
are obliged to hand in all electrical or electronic devices, regardless of whether
or not they contain toxic substances, at a municipal or commercial collection
point so that they can be disposed of in an environmentally acceptable
manner. Consult your municipal authority or your dealer for information about
disposal.
8