Connect The Cables - Axis Washer Kit B Installationsanleitung

Connect the cables

Connect the power supply
1
Silicone sheath
2
Strap
1. Connect a suitably sectioned cable from the power supply terminal J1 to the electric
network.
2. Cover the cable with the silicone sheath and fasten it with a strap.
NO TICE TICE
NO NO TICE
• Make sure the the earth cable is 10mm longer than the other two cables. It will decrease
the risk of the of the earth cable to be disconnected accidentally if it is pulled.
• All the conductors of terminals must be separated from the other low voltage circuits. The
disconnection of a wire must not compromise the protection against electric shocks.
AXIS Washer Kit B
13
EN