Windows 7; Pc Pairing Procedure - suvil FreeAudio BT Handbuch

User Guide
| FreeAudio BT |
permit selecting between the "Stereo
Audio" mode (to listen to stereo music)
and the "Hands-free Audio" mode (to make
a videoconference using the microphone
incorporated in your FreeAudio BT).
Note: It is very important for you to
know beforehand that both the Bluetooth
chipset incorporated in your PC and that
of the USB-BT Dongle you install (if your
PC does not have the Bluetooth function),
satisfy the A2DP profile to be able to
listen to stereo music. Some old or low-
cost Bluetooth chipsets do NOT work with
Windows 7 or they do work but they only
transmit data and not sound, so the PC
will not recognise the FreeAudio BT.

9. Windows 7

comes with Bluetooth software installed.
This software has been developed by
Broadcom Corporation (www.broadcom.com).
From this website you can download the
Widcomm Bluetooth software to your PC (if it
has not already been installed) for each one
of the Windows versions.

10. PC Pairing Procedure

Synchronization with the Microsoft
software (Widcomm):
10.1- Place both Bluetooth devices at a
distance of less than 1 metre.
10.2- Make sure that the FreeAudio BT is
OFF. Press the multi-function button for
about 12 seconds until the blue and red
LEDs flash alternatively.
10.3- Make sure that the Bluetooth
software is installed. On the toolbar, select
the Bluetooth icon with the right-hand
button of the mouse; a dropdown window
will appear, choose Add a device.
With the Mouse select the Suvil FA BT Icon
and click on next.
A screen will appear informing you that the
device has been added to this equipment
correctly. Click on close.
6