Shopify ZEBUL’HAMAC Gebrauchsanweisung Seite 10

NB!!!!!!!
Once the hook is in place, install the
cord as shown in this photograph:
For the door bracket, you must also
use the cord.
When the cord is in place, install the snap
hook in the loop of the cord and screw it.
The cord prevents contact between the two metal elements: the snap hook delivered with the hammock on
the one hand, and your hook on the other.
To adjust the height:
The hammock's height can be adjusted by means of the metal "eight" on the main rope. Pull the "eight"
upwards to raise the hammock; and pull the "eight" downwards to lower the hammock.
To adjust the width:
You have to untie that knots that you have made under the wooden bars and change the spacing between
them.
ADJUSTING THE HAMMOCK