Herunterladen Diese Seite drucken

WOODLAND SCENICS ST4790 STRAIGHT Montageanleitung

Werbung

CAUTION:
Tools recommended. Use with care.
This product was made with Medium Density Fiberboard that
complies with TSCA Title VI and California ACTM 93120.
MODELING AND CARE INFORMATION:
Take care to cover project area and clothing appropriately. Follow recommendations for use and clean up.
INSTRUCTIONS / INSTRUCTIONS / INSTUCCIONES / ANWEISUNGEN
ST4790 STRAIGHT
MODULE KIT STAND
36" W x 18" D x 35 1/2" H (91.4 cm x 45.7 cm x 90.1 cm)
Frame Pieces and Leg Bottoms have predrilled holes. Make sure top of Frame Pieces are flush when assembled. For faster assembly, we recommend using a screw gun. Paint
Stand, if desired. TIP: Use clamps to hold pieces in place while assembling.
Les pièces du cadre et les fonds des jambes ont des trous prépercés. Assurez-vous que le dessus des pièces du cadre est affleuré lorsqu'il est assemblé. Pour un montage plus
rapide, nous recommandons d'utiliser un pistolet à vis. Stand de peinture, si désiré. POINTE! Utilisez des pinces pour maintenir les pièces en place pendant l'assemblage.
Las piezas del bastidor y las patas tienen orificios previamente perforados. Asegúrese de que la parte superior de las piezas del bastidor estén a ras cuando las ensamble. Para
un montaje más rápido, recomendamos usar un destornillador eléctrico. Píntelo sobre un soporte, si lo desea. ¡TRUCO! Use abrazaderas para sostener las piezas en su lugar
durante el montaje.
Rahmenstücke und Beinböden haben vorgebohrte Löcher. Stellen Sie sicher, dass die Oberseite der Rahmenstücke bündig ist, wenn sie zusammengebaut werden. Für eine
schnellere Montage empfehlen wir einen Akku-Schrauber. Staffelei oder Malstativ, falls gewünscht. Tipp! Verwenden Sie Klemmhalter, um die Teile während der Montage
festzuhalten.
4 pcs - A
4 pcs - T-Nuts
Model making product. Not a toy! Not suitable for children under 14 years! / Produit
pour le modélisme. Pas un jouet! Pas adapté aux enfants de moins de 14 ans! /
Producto para modelismo. No es un juguete! No adecuado para niños menores de 14
años! Modellbauartikel. Kein Spielzeug! Nicht geeigent für Kinder unter 14!
This kit suggests the use of materials that may stain or cause damage.
Top View
vue de dessus
vista superior
Draufsicht
The Pine wood included in this kit has
been Kiln Dried & Heat Treated.
X4
KIT CONTENTS
HARDWARE
32 pcs - 1 5/8" (4.12 cm) Drywall Screws
4 pcs - Adjustable feet
4 pcs - T-Nut
2 pcs - 2 1/4 " (5.71 cm) Bolt
2 pcs - Wing Nut
4 pcs - Washer
LEGS (A)
PINE
4 pcs - 1 1/2" x 1 1/2" x 35 1/2"
(3.8 cm x 3.8 cm x 90.1 cm)
FRAME PIECES (B & C)
MDF
4 pcs - 3 3/8" x 3/4" x 18"
(8.5 cm x 1.9 cm x 45.7 cm)
B
4 pcs - 3 3/8" x 3/4" x 36"
(8.5 cm x 1.9 cm x 91.4 cm)
C
Suggested Tools
screw gun, hammer, clamps
A

Werbung

loading

Inhaltszusammenfassung für WOODLAND SCENICS ST4790 STRAIGHT

  • Seite 1 4 pcs - T-Nut 2 pcs - 2 1/4 " (5.71 cm) Bolt INSTRUCTIONS / INSTRUCTIONS / INSTUCCIONES / ANWEISUNGEN 2 pcs - Wing Nut ST4790 STRAIGHT 4 pcs - Washer MODULE KIT STAND LEGS (A) 36" W x 18" D x 35 1/2" H (91.4 cm x 45.7 cm x 90.1 cm) PINE 4 pcs - 1 1/2"...
  • Seite 2 4 pcs - B 4 pcs - A 16 pcs - 1 5/8" (4.12 cm) Screws 2 pcs - C 8 pcs - 1 5/8" (4.12 cm) Screws 2 pcs - C 8 pcs - 1 5/8" (4.12 cm) Screws A,B,C...
  • Seite 3 4 pcs - Adjustable feet 2 pcs - 2 1/4" (5.71 cm) Bolt 2 pcs - Wing Nut 4 pcs - Washer Position Stand against wall. Level Stand by setting a level in different locations on top and adjusting the Feet accordingly. If using more than one stand, bolt together with 2 1/4"...
  • Seite 4 TIP! To keep finished module centered on stand and prevent it from moving, cut four squares (approx. 2" x 2") from scrap foam and glue them to underside of module. POINTE! Pour garder le module fini centré sur le support et l’empêcher de bouger, découpez cinq carrés (environ 5 cm x 5 cm) de jeter la mousse et les coller sur le dessous du module.

Diese Anleitung auch für:

St4790 straight module kit stand