Ayaya WLAN 8100 Bedienungsanleitung Seite 27

Procedure
1. Locate the appropriate position of the wall anchors. The wall anchors should be
2. Install the screws into the wall anchors but do not seat them fully, leave at least a
3. Slip the wall bracket over the heads of the screws and slide the bracket to the right
Avaya WLAN 8100 Regulatory Information - WLAN AP 8120 with External Antenna
95mm apart horizontally and 80mm apart vertically.
The wall bracket is designed to use a minimum of 2 anchors and a maximum of
4.
2mm gap between the screw head and the wall.
as viewed facing the wall.
Mounting the WLAN AP 8120 with External Antenna on a wall
March 2012 27