Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Information - Dentaurum 070-900-00 Gebrauchsanweisung

Wärmeplatte für polyclav drucktopf
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Dear customer
Thank you for choosing a quality product from Dentaurum.
It is essential to read these instructions carefully and adhere to them to ensure safe,
efficient use and ensure that you and your patients gain full benefit. Instructions for use
cannot describe every eventuality and possible application. In case of questions or ideas,
please contact your local representative.
As our products are regularly upgraded, we recommend that you always carefully read
the current instructions for use supplied with the product and stored in the internet at
www.dentaurum.com, even though you frequently use the same product.
1. Manufacturer
Dentaurum GmbH & Co. KG I Turnstraße 31 I 75228 Ispringen I Germany

2. Safety information

Read through the instructions for installing and operating the unit carefully
before switching it on.
The Heating Plate should only be used for heating the Polyclav
pressure vessel.
Do not place inflammable substances such as cardboard or paper on the Heating
Plate.
Never use the Heating Plate without the Polyclav
If repair is required: remove the electric supply plug before opening the unit.
3. General notes and disposal
When a Dentaurum product is finally no longer in use, the disposal regulations of that
particular country apply. Dentaurum or the dental trade is available to answer questions
regarding the correct disposal of any specific product.
Note:
This symbol indicates, products marked with it should not be disposed off
together with garbage of households. The legislator disallows commercial
customers to return electronic waste via municipal collection points. Further
information is available through Dentaurum or the dental trade.
4. Application and Description
The thermostatically controlled Heating Plate for the Polyclav
temperature that is necessary for the polymerization process. The temperature of the
water in the Polyclav
®
6
pressure vessel is kept at approx. 43 °C / 109 °F.
polymerization
®
pressure vessel.
®
retains the constant
®

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Dentaurum 070-900-00

Diese Anleitung auch für:

070-901-00

Inhaltsverzeichnis