Intermec PB50 Installationsanleitung Seite 4

Installing the Vehicle Cradle
1 Attach the RAM cradle base to the vehicle cradle using the
2 Attach the RAM vehicle base to your vehicle using the four ¼-
3 Attach the vehicle cradle to the RAM vehicle base by placing
4
four button head hex screws and the hex key.
inch-flathead hex screws and nuts.
the mounting arm over the two bases and then tightening
the mounting arm.
Cradle
Mounting arm
base
Vehicle
cradle
Hex screw
(4 places)
Vehicle
cradle
Cradle base
Vehicle
base