NGS Technology Red Artica Bedienungsanleitung Seite 6

Pairing the headset with Bluetooth mobile phone
Please make sure your mobile phone has Bluetooth function that
can be used. Specific pairing procedures may vary with different
mobile phone. Please refer to your mobile phone manual for further
information. Steps as follows:
1. Please keep the headset and mobile phone in the range of 1 meter
when pairing.
2. Make the headset enter into pairing mode (Please refer to "how to
enter into pairing mode").
3. Start the Bluetooth function of mobile phone and search the
Bluetooth devices. After searched, select "ARTICA NGS"in the
Bluetooth device list.
4. According to indication, enter password or PIN No:"0000" ,and press
the key of" Yes" or "confirm.
5. After successful pairing, select "ARTICA NGS" in the Bluetooth
device list, and press "connect" .
6. After successful connecting, the blue LED of the headset quickly
blinks twice or three times every 4 seconds.
3 Making calls with the headset
Function
Voice dial
Redial last number Standby mode
Volume up
Volume down
Answer calling
Reject calling
6
Status of headset Operation
Standby mode
Conversation
mode
Conversation
mode
Ringing
Ringing
Press and hold > (next song)
button for 2s, release it till
hearing indication sound
Short press MFB twice
quickly
Short press or long press
+ key
Short press or long press
- key
Short press MFB
Press and hold MFB for 2s,
and release it till hearing
indication sound