Concept VF 3040 Bedienungsanleitung Seite 36

E N
NEVER IMMERSE THE APPLIANCE
INTO WATER OR OTHER LIQUID!
OPERATING INSTRUCTIONS
Before using the appliance for the first time, wash the toasting surfaces using a wet cloth; in spite of that,
we recommend that the first two pairs of wa ffles should not be eaten.
Food preparation procedure:
1. Plug the appliance into a socket. Make sure that
the mains voltage conforms to the voltage of the
appliance. Both the "Power On" indicator lamp and
"Heat On" indicator lamp will be on.
2. Close the top cover of the wa ffle maker (during its
warming-up, you can prepare your food).
3. When the green "Heat On" indicator lamp goes off,
the wa ffle maker is ready.
4. Open the top cover of the wa ffle maker and put
wa ffles on the lower part of the wa ffle maker.
5. Your food will be ready to be served in approximately
4 minutes or longer as per your taste.
NOTE:
• Do not close the wa ffle maker by force. A cloud of steam may rise from in between the toasting surfaces
during the toasting process.
• Keep in mind that the "Heat On" indicator lamp will go on and off as the thermostat keeps the wa ffle
maker at proper temperature.
• Open the wa ffle maker and remove the wa ffles using a plastic or wooden spatula. Never use a metal knife
as it might damage the non-adhesive coating.
• Close the top cover in order keep the surfaces hot for further toasting.
• During the toasting process, you can prepare your food.
• After finishing the toasting, unplug the appliance.
36 V F 3040