PDP 051-067-EU Bedienungsanleitung Seite 3

5. Place the remote close to the PS4
and wait for "PDP Snap Remote" to appear
in the device list.
6. Using a connected controller, select "PDP
Snap Remote" from the list, and press the "X"
button. When prompted, select "Yes".
7. The red LED on the remote will illuminate for
3 seconds and then turn off, indicating
successful pairing.
8. If pairing is unsuccessful, repeat steps 3
through 6.
TIPS
For the latest PS4
•
user's guide for the PS4
(manuals.playstation.net/document/).
For the latest Snap Remote instructions, refer to
•
the online user's guide
(support.pdp-eu.com)
The PS4
•
after 30 minutes of inactivity. To reactivate the
remote, press the PS button on it once. The Snap
Remote will then immediately reconnect to the
PS4 system for continued use.
™
Only one Snap Remote can be registered with
•
the PS4
™
When you pair the Snap Remote with another
•
PS4 system, registration with the original
™
PS4 system is cleared. To use the remote
™
with the original PS4
to follow the pairing procedure again.
™
system will disconnect the remote
™
system at a time.
usage instructions, refer to the
system
™
.
system, you will have
™
system
™