Basic Operation - CyberPower PR2200ELCDSL Bedienungsanleitung

DESCRIPTION
1. Power Switch
Used as the master on/off switch for equipment connected to the battery power supplied outlets.
2. Power On Indicator
This LED is illuminated when the utility power is normal and the UPS outlets are providing power,
free of surges and spikes.
3. LCD Module Display
Intelligent LCD display shows all the UPS information using icons and messages. For more
information please review the "Definitions for Illuminated LCD Indicators" section below.
4. Down/Display Button
The button can be used to select the LCD display contents including Input Voltage, Output Voltage,
and Estimated Run Time. Short press the button to scroll down the function menu. Pressing the
button for 2 seconds will keep the LCD display always on or turn the LCD display off while in
AC/Utility power mode. For more information about the Down/Display Button, please refer to the
Function Setup Guide.
5. Up/Mute Button
Short press the button to scroll up the function menu. Holding the button for more than 2 seconds
will silence the alarm. For more information about the Up/Mute Button, please refer to the Function
Setup Guide.
6. Enter/Setup Button
Press the button for 2 seconds to enter the setup menu and then select the functions for
configuration. For more information about the Enter/Setup Button, please refer to the Function
Setup Guide.
7. Battery and Surge Protected Outlets
The unit has nine battery powered/surge suppression outlets for connected equipment to ensure

BASIC OPERATION