Inhaltsverzeichnis
Werbung
58
DESCALE FUNCTION
•
After the the descaling liquid pump in is
completed, the descaling program starts.
The process takes about 30 minutes.
The steam oven injection system will need to be
cleaned at the end of the descaling process.
3
•
Remove the descaling liquid from the
container 3.
•
Fill container with the descaling liquid
approx. 500ml and place the container
back 3.
•
Touch "OK" 4, pump in program starts.
The oven injection system will be cleaned with
water.
Pump out the water and repeat this process!
Follow the appropriate information that appears
on the display. It is necessary to remove traces of
the descaling liquid completely!
When the descale programme is finished you will
see the appropriate message on the display.
EN
4
Werbung
Inhaltsverzeichnis
