Giro 5000596000 Bedienungsanleitung Seite 4

Figure 6
Acu dial and Acu dial 2
To adjust our Acu Dial and Acu Dial 2 system, follow these steps.
The Acu Dial and Acu Dial 2 allows for on the head tension adjustment. Press
the button on top of the Acu Dial and Acu Dial 2 (Figure 9) with your fingers
and turn dial with your thumb-clockwise to tighten, counterclockwise to loosen
(Figure 10) to a comfortable fit. The fit system should be snug, but not uncom-
fortably tight. For safety we recommend that you DO NOT adjust the Acu Dial
and Acu Dial 2 while you are riding.
Figure 9
The Roc Loc, Acu Dial, Acu Dial 2 and Mini Loc are designed to enhance the fit
and stability of your helmet. It is not a replacement for your helmet's straps.
Do not attempt to remove the fit system from your helmet; doing so will void
all of the helmet's warranties.
Now your helmet fits properly. Be sure to check the adjustment of your helmet
before each ride.
Some helmets come with removable visors. To remove visor, follow these steps:
Snap-fit Visors
Pull the ends of the visor loose from the helmet and then lift away from the
helmet. To replace the visor, center it on the helmet and then snap the pins (A)
on the visor into the holes (B) in the helmet (Figure 11).
Figure 7
HELMEtS WitH ViSORS
4 4
Figure 8
Figure 10