Chapter 4. Led Massage - HiTi P310W Benutzerhandbuch

Chapter 4. LED Message
Red:
Green:
Blue:
Error
Blink (When the error
happens, error message will
be displayed on the mobile
devices)
Standby, Ready
Blink fast 0.1s
Blink slower 0.5s
Wireless reset mode
- Press the power switch for 6 seconds until blue blink.
- Press the switch one more time, once the light turns to green means
its been reset.
4 - 1
HiTi P310W user manual
Blink 1 time: didn't close the ribbon
door or no ribbon
Blink 3 times: Ribbon empty
Blink 4 times: Out of Paper
Blink 5 times: Paper jam or Ribbon jam
Blink 13 times: can't update F/W
Press the power switch to turn on the
power
Power can be turned off by pressing the
power switch for 3 seconds.
Transiting Printing info/ Updating FW
Printing