Installation Method - LG V-net serie Montageanleitung

Installation Method

Installation Method
① Separating cover
- To separate, put "-" shaped driver at the arrow marked section and twist the driver softly.
② Separating PCB from bottom case
Separate the sensor from the bottom case and fix the bottom case on the wall by driving 3 screws
included.
Separate PCB from bottom
case by moving fixing-knob
a bit outward
6 CO2 Sensor
Screw fixing(3pcs)
Do not install the product beyond
given conditions as below.
(Temp : 0~40℃, Humidity :
0~75%RH)