Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance Instructions - Schumacher SA874U Benutzerhandbuch

12v nass-/trocken-autostaubsauger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
5.3 Using the vacuum for liquids
WARNINGS:
• Never use the appliance to suck up any other liquid than cold water.
• Do not exceed the indicated MAX level when sucking up liquids (measure the MAX
level when the appliance is in the vertical position, with the suction inlet facing down).
• When sucking up liquids, always keep the appliance in the vertical position, with
the suction inlet facing downwards. Never place the vacuum in any other position
and never allow liquids to come into contact with the motor.
1. Attach the wet suction attachment.
2. Press the ON/OFF switch forward, to turn on.
3. Keep the appliance on with the suction inlet facing down at all times.
4. When you are finished using the vacuum, press the ON/OFF switch
backward, to turn off.
5. Empty the container immediately after use and wash the filter.
6. Rinse the container and the filter in cold water and let all parts dry completely
before reassembling them.
6.

MAINTENANCE INSTRUCTIONS

6.1 How to empty the container and clean the filter
Before cleaning the device, always make sure it has completely cooled.
Refer to the diagram in section 4.
1. Press the "open container" button (3) to open the container, and then unhook
the container (7).
2. Remove the filter (2) from the inside of the container and empty the container.
3. Clean the filter and, if necessary, clean the inside of the container with a dry cloth.
IMPORTANT: Do not wash the appliance or its components in the dishwasher.
4. Reinstall the filter in the container.
5. Reassemble the container and the body, inserting at first the lower part and then
the upper part, to obtain the complete closure
NOTE: After intensive or long use, the filter should be replaced.
6. DO NOT use the device if the filter is broken or worn out.
6.2 After use and before performing maintenance, unplug and disconnect the vacuum.
6.3 Use only a dry cloth to clean the unit. Do not immerse the body of the vacuum or
the charging cable in water or other liquids.
• 6 •

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis