Viglen Omnino serie Ausführliches Benutzerhandbuch Seite 29

Updating/Reinstalling Individual Driv-
ers
If you wish to update/reinstall individual drivers it may
be necessary to uninstall the original driver.
To do this go to the Control Panel in the Windows OS
and double-click the Add/Remove Programs item. If
you see the individual driver listed (if not see below),
uninstall it, following the on screen prompts (it may be
necessary to restart the computer). Go to the appropriate
section of the manual to complete the update/reinstall
procedure for the driver in question.
If the driver is not listed in the Add/Remove Programs
item:
1. Click Start (menu), point to Settings and click Control
Panel. Double-click System (icon) and then click
Hardware (tab) > Device Manager (button).
2. Double-click the device you wish to update/reinstall the
driver for (you may need to click "+").
3. Look for the Update Driver button (check the Driver
tab) and follow the on screen prompts.
Concise User's Guide
Windows XP Service Pack 1/1a
Make sure you install Windows XP Service Pack 1/1a (or
a Windows XP version which includes Service Pack 1/1a)
before installing any drivers. Service Pack 1/1a includes
support for USB 2.0.
If you have upgraded the system by installing Service
Pack 1/1a (i.e. your Windows XP version does not include
Service Pack 1/1a) then follow these instructions:
1. Go to Device Manager and click "+" next to Other de-
vices (if its sub-items are not shown).
2. Right-click Universal Serial Bus (USB) Controller and
select Uninstall > OK.
3. Restart the computer and it will find the USB 2.0 control-
ler.
Driver Installation - 23