Chauvet Professional EPIX FLEX DRIVE Schnellreferenzanleitung Seite 6

EN
Menu Map
Main Level
1.Operating
Mode
2.Personality
1.Output 1
3.Port Setup
2.Output 2
1.Manual IP
4.Set IP
Mode
5.Set
Netmask
1.User Color
6.Standalone
Mode
2.Preset Color
3.Automatic
7.Set LCD
Backlight
8.Set Display
9.Factory
Reset
10.Fixture
UID
11.Firmware
Version
5
QUICK REFERENCE GUIDE
Programming Levels
1.Standalone
2.Art-Net
3.sACN
4.DMX
1.17 Channel
2.34 Channel
3.Pixel
1.DMX Start
1–496
Address
2.Network
0–256
Universe
3.LED
1–960
Quantity
1.DMX Start
1–496
Address
2.Network
0–256
Universe
3.LED
1–960
Quantity
_ _ _._ _ _._ _ _._ _ _
2.Static IP
A. 255.000.000.000
B. 255.255.000.000
C. 255.255.255.000
1.Red:
2.Green: 000–255
3.Blue:
1.Red
2.Green
3.Blue
4.Cyan
5.Magenta
6.Yellow
7.White
1.Program: 000–042
2.Speed: 000–100
On
30s
Normal
Inverted
NO
YES
_ _ _ _ _ _ _ _ _ _ _ _
B_._ V_._–_._
Description
Selects the control protocol
Sets the control personality (see
Sets the starting address for Output 1
Sets the lowest of the consecutive universes to which
Output 1 is assigned (range determined by Operating Mode)
Sets the number of LEDs controlled by Output 1
Sets the starting address for Output 2 in 34 Channel mode
and Pixel mode
Sets the lowest of the consecutive universes to which
Output 2 is assigned (range determined by Operating Mode)
Sets the number of LEDs controlled by Output 2
Sets a custom IP address (0–255)
Sets a preset IP address
Sets the net mask
Combine red, green, and blue to make a custom color
Preset static colors
Selects an automatic program
Sets the automatic program speed
Display backlight always on
Turns off display backlight after 30 seconds of inactivity
Rotates display 180°
Resets the product to factory defaults
Shows product UID
Shows current firmware version
Control Personalities)
ÉPIX Flex Drive QRG Rev. 2