Initial Setup - HP df750 Serie Benutzerhandbuch

Initial Setup

NOTE: The following instructions are shown using the remote control
unit. Most of these functions can also be conducted via the same
control keys located on the top side of the picture frame. The keys are
labeled with the same icon/text.
1. Pull tab from remote control to activate. (Note: If a replacement
battery is required, purchase model #CR2025)
2. Press button and use the directional arrows to highlight
"SETTINGS" icon.
3. Press button and use the directional arrows to highlight
"OSD LANGUAGE".
4. Press button again and select the On-Screen-Display
language you want.