In the USA: If you experience problems with this unit, please go to http://www.ikey-audio.com or call 1-732-738-9003 for GCI Customer Service. Do not attempt to return this equipment to your dealer. GCI
Technologies stands behind their products with a 1 year limited warranty on all audio products. For larger images & detailed specs visit our website @ http://www.ikey-audio.com. WE ARE NOT RESPONSIBLE FOR
TYPOGRAPHICAL ERRORS OR OMISSIONS. WE RESERVE THE RIGHT TO CHANGE WITHOUT NOTICE. Parts of the design of this product may be protected by worldwide patents. Information in this manual is sub-
ject to change without notice and does not represent a commitment on the part of the vendor. GCI Technologies shall not be liable for any loss or damage whatsoever arising from the use of information or any error
contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photo-
copying and recording, for any purpose without the express written permission of GCI Technologies Corp. It is recommended that all maintenance and service on this product is performed by GCI Technologies Corp.
or its authorized agents. GCI Technologies Corp. will not accept liability for loss or damage caused by maintenance or repair performed by unauthorized personnel.
Seite 1
Fax: + 49 89 319 019 818 In the USA: If you experience problems with this unit, please go to http://www.ikey-audio.com or call 1-732-738-9003 for GCI Customer Service. Do not attempt to return this equipment to your dealer. GCI Technologies stands behind their products with a 1 year limited warranty on all audio products. For larger images & detailed specs visit our website @ http://www.ikey-audio.com. WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS OR OMISSIONS.
Any mounting of the product should follow the manufacturer's instructions, ity of overhead power lines or other electric light or power circuits, or where and should use a mounting accessory recommended by the manufacturer. it can fall into such power lines or circuits. When installing an outside anten- PLEASE READ BEFORE USING APPLIANCE, na system, extreme care should be taken to keep from touching such power CART: A product and cart combination should be moved with care.
iKEYplus PORTABLE USB RECORDER TABLE OF CONTENTS: Warnings and WEEE Page.....................2 INTRODUCTION: Introduction, Features....................3 Congratulations on purchasing an iKEYplus P USB R . This next ORTABLE ECORDER generation recording device features the latest advancements in engineering and is Parts List and Included Accessories................4 backed by a One year limited warranty*.
Included in this Package Parts list & Accessories: RECORD RECORD 4 x Regular Screws Carrying Case 4 x Thumb Screws Stereo T-Mic RCA cable with single ground spade Power Supply Operations Manual Black, Red, & Chrome Faceplates...
Connecting the iKEYplus using the included Stereo T-Mic RECORD RECORD left side: audio input mic jack right side: audio output NOTE BE SURE THE ACCOM PANYING SWITCH IS IN THE POSITION Headphones Stereo T-Mic (included) (optional for monitoring dur- USB device ing recording process)
Connecting a phonograph turntable to the iKEYplus* * See Appendix C for detailed instructions RECORD RECORD left side: audio input right side: audio output RCA jacks NOTE BE SURE THE ACCOMPA NYING SWITCH IS IN THE POSITION Headphones Phonograph Turntable (optional for monitoring dur- USB device (Standard type, magnetic car-...
Connecting a mixer* to the iKEYplus *recording from a mixer may require alternate RECORD RECORD cables/adapters (not included), depending on brand left side: audio input right side: audio output RCA jacks NOTE BE SURE THE ACCOMPA NYING SWITCH IS IN THE POSITION Headphones Mixing Console...
Connecting a guitar amplifier* to the iKEYplus *recording from a guitar amp may require alternate cables/adapters RECORD RECORD (not included), depending on brand left side: audio input right side: audio output RCA jacks NOTE BE SURE THE ACCOMPA NYING SWITCH IS IN THE POSITION Headphones Guitar Amplifier...
Connecting a handheld mic to the iKEYplus RECORD RECORD left side: audio input mic jack right side: audio output mic jack NOTE BE SURE THE ACCOM PANYING SWITCH IS IN THE POSITION Handheld Mic Headphones (not included) (Optional for monitoring USB device during recording process)
Visual Quickstart Guide RECORD RECORD STEP 1: SUPPLY POWER TO THE iKEY Remove the aluminum cover and install batteries according to the printed diagram on the battery tray. Alternatively, you may use the supplied 9VDC power adapter. If you choose to use rechargeable batteries, connecting the power adapter will charge the batteries when the power switch is ON.
Seite 11
Visual Quickstart Guide (continued) RECORD RECORD STEP 3: SET THE SWITCH! If you are recording from a LINE LEVEL device, switch the posi- tion to LN (to the far left). If recording from a PHONOGRAPH TURNTABLE, switch the position to PH (middle position). Finally, if you are using a MICROPHONE, switch the position to MIC.
Seite 12
Visual Quickstart Guide (continued) RECORD RECORD STEP 5: CONNECT HEADPHONES OPTIONAL If you wish to monitor the signal that will be recorded using the iKEYplus, connect headphones with a 1/8 inch (3.5mm) jack to the headphone monitor output. The signal coming from the headphone jack may be very loud, so take the necessary precau- tions when using this output.
Seite 13
Visual Quickstart Guide (continued) RECORD RECORD STEP 7: START PLAYBACK OF SOURCE In order to adjust the recording level of the iKEYplus, it is nec- essary to start playing the source that you wish to record from. If you will be recording from a microphone, begin speaking in the same voice that you will use when the unit is recording.
Seite 14
Visual Quickstart Guide (continued) RECORD RECORD STEP 9: SELECT FORMAT AND QUALITY Using the SEL button on the front left of the unit, select what format you wish to record in. Press the button repeat- edly until the LED light illuminates the desired format & quality.
Seite 15
Visual Quickstart Guide (continued) RECORD RECORD STEP 10: PRESS RECORD TO START! When you are ready to start the recording, press the REC button found on the left front of the unit. Once the REC button is pressed, all of the LED lights will turn on briefly to show that the unit has recognized your command.
Seite 16
Visual Quickstart Guide (continued) RECORD RECORD STEP 11: PRESS RECORD TO STOP! When you are ready to end the recording, press the REC but- ton found on the left front of the unit. You MUST end recording this way, or the file will not be saved. Once the REC button is pressed, all of the LED lights will turn on briefly to show that the unit has recognized your command.
Seite 17
Visual Quickstart Guide (continued) RECORD RECORD STEP 12: EJECTING THE USB DEVICE You must hold down the REC button for 3 seconds before disconnecting the USB device. The LED lights will flash 3 times in a row, showing that it is now safe to remove the device.
If you have numerous applications which handle these files, you may right click on any of the Figure A - Choose Open folder to view files using iKEY files and select an application using the ‘Open With’ option. Windows Explorer.
Seite 19
NOTE THAT THE AFOREMENTIONED SOFT WARE IS NOT SUPPORTED IN ANY Pictured: Sony Sound Forge Audio Studio 7.0... WAY BY GCI OR IKEY AUDIO, AND YOUR DECISION TO USE IT IS AT YOUR OWN RISK.
LOW BATTERY, DEVICE FULL, AND BUSY LED INDICATORS: Additional LED indicators to take note of are the LOW BATTERY, DEVICE FULL, and BUSY indicators. The LOW BATTERY indicator shares the same LED as the RECORD LED. However, LOW BATTERY is signaled when that LED is flashing. When your storage device approaches more than 95% full, the iKEYplus will signal DEVICE FULL by flashing all LEDs at once, repeatedly, until the storage device becomes completely full.
(in iTunes) so that the music on the iPod is not automatically updat- ed. FAILURE TO DO THIS WILL RESULT IN iTUNES ERASING YOUR RECORD- INGS WHEN IT IS LAUNCHED. GCI Technologies and iKEY Audio will not be held responsible for loss of data due to improper procedure! 1.
OK. See Figure D (on the next page). connected the iPod from the iKEYplus, you will find that the iKEY files are at the very bottom of the Songs list. If you have connected the iPod to your PC and have loaded 8.
6. Open the ‘iPod_Control’ directory, then the ‘Music’ directory, then click on the directory (usually at the very bottom) labeled ‘iKEY’. 7. Copy the recordings you wish to your hard drive by dragging and dropping, or by using the copy and paste function.
Seite 24
Figure E - Opening the Terminal window in OSX allows you to issue the necessary commands to retrieve your recordings from an iPod.
APPENDIX B TROUBLESHOOTING THE iKEYPLUS / FREQUENTLY ASKED QUESTIONS If you are having difficulty with your iKEYplus, read through some of these sugges- tions. The majority of issues can be resolved simply by going back over the proce- dures, and making sure you follow them word-for-word. Q: The recording I have made is too quiet when I play it back, and it doesn’t sound clear.
Seite 26
3. It is a possibility that the USB flash drive that you are using is causing interference 1. It is possible that your storage device is write protected, or simply that the iKEY when the LED light flashes on the actual flash drive itelf. Try another flash drive to and/or the storage device needs to be reset.
APPENDIX C CONNECTING A PHONOGRAPH TURNTABLE TO THE iKEYPLUS To connect a conventional phonograph turntable to the iKEYplus, you will need to use the supplied RCA cable with single ground spade. As you will notice, there is only a ground spade on one side of the cable, not both. In order to minimize hum, this ground spade must be placed under the grounding lug found on the rear of your turntable.
AC Voltage Requirements..........120 VAC 60Hz or 230 VAC 50Hz ______________________________________________ ______________________________________________ iPod® and iTunes® are registered trademarks of Apple Computer, Inc. *The stated warranty does not affect statutory local warranties ______________________________________________ ______________________________________________ Please register your warranty online at www.ikey-audio.com ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________...
causar daños a personas. Utilice solo soportes recomendados por el fabri- en la proximidad de líneas eléctricas de alta tensión o centrales de transforma- cante, o vendidos con el producto. Al montar la unidad, siga las instrucciones ción eléctrica, o donde puede ser afectado por este tipo de líneas. Al instalar POR FAVOR LEALO ANTES DE UTILIZAR LA UNIDAD, del manual, y utilice los accesorios recomendados por el fabricante.
iKEYplus GRABADOR PORTATIL POR USB TABLA DE CONTENIDOS: Precauciones y WEEE....................29 INTRODUCCION: Introducción y características..................30 Felicidades por la compra de iKEYplus G USB. Esta unidad de RABADOR ORTATIL POR grabación de la próxima generación incorpora los últimos avances en tecnología y Lista de componentes y accesorios................31 está...
Incluido en este embalaje Unidades y accesorios: RECORD RECORD 4 x Tornillos estandar Funda Transporte 4 x Tornillos cabeza Micro T Estereo Cable RCA con terminal de masa Adaptador corriente Manual instrucciones Carátulas Negra, Roja, y Cromada...
Conexión del iKEYplus usando el Micro en T Estereo incluido RECORD RECORD Izquierda: entrada audio jack micro Derecha: salida audio NOTA ASEGURESE QUE EL INTERRUPTOR ESTA EN MIC! POSICIÓN Auriculares T-Mic Estereo (incluido) (opcional para monitorizar dispositivo USB durante la grabación)
Conexión de giradiscos al iKEYplus* *Ver Apéndice C para instrucciones detalladas RECORD RECORD Izquierda: entrada audio Derecha: salida audio RCA jacks NOTA ASEGURESE QUE EL INTERRUPTOR ESTA EN POSICION Auriculares Giradiscos (opcional para monitorizar dispositivo USB (Tipo estandar, cápsula magnéti- durante la grabación) ca, no pre-amplificado)
Conexión del mezclador* al iKEYplus *al grabar de un mezclador, puede necesitar cables alter- RECORD RECORD nativos (no incluidos), dependiendo de la marca Izquierda: entrada audio Derecha: salida audio jacks RCA NOTA ASEGURESE QUE EL INTERRUPTOR ESTA EN POSICIÓN Auriculares Mezclador (opcional para monitorizar dispositivo USB...
Conexión de amplificador de guitarra al iKEYplus *grabar de un amplificador de guitarra puede requerir cables alter- RECORD RECORD nativos (no incluidos), según la marca Izquierda: entrada audio Derecha: salida audio jacks RCA NOTA ASEGURESE QUE EL INTERRUPTOR ESTA EN POSICIÓN Auriculares Amplificador Guitarra...
Conexión de micro de mano al iKEYplus RECORD RECORD Izquierda: entrada audio jack mic Derecha: salida audio jack mic NOTA ASEGURESE QUE EL INTERRUPTOR ESTA EN MIC! POSICIÓN Micro de Mano Auriculares (no incluido) (opcional para monitorizar dispositivo USB durante la grabación)
Guía Visual de inicio RECORD RECORD PASO 1: ALIMENTACION DEL iKEY Retire la tapa de aluminio y coloque las baterias según el diagra- ma impreso en el mismo alojamiento. Alternativamente, puede utilizar el adaptador de corriente de 9VDC. Si elige usar bate- rias recargables, el mismo adaptador las recargara cuando la unidad esté...
Seite 38
Guía Visual de inicio (continuación) RECORD RECORD PASO 3: AJUSTAR EL INTERRUPTOR! Si está grabando en nivel LINEA, ajuste el interruptor a LN (hacia la izquierda). Si está grabando de GIRADISCOS, ajuste a posición PH (en el centro). Finalmente, si está usando un MICROFONO, seleccione la posición MIC.
Seite 39
Guía Visual de inicio (continuación) RECORD RECORD PASO 5: CONEXION AURICULARES OPCIONALES Si quiere monitorizar la señal que está grabando en el iKEYplus, conecte auriculares al jack de1/8”(3.5mm) para monitirización por auriculares. La señal que encontrará en la toma de auricu- lares puede ser excesiva, así...
Seite 40
Guía Visual de inicio (continuación) RECORD RECORD PASO 7: REPRODUCCION DE LA FUENTE Para regular el volumen de grabación del iKEYplus, es necesario inciar la reproducción de la fuente que se desee grabar. Si va a grabar de un micrófono, empice a hablar al mismo nivel que utilizará...
Seite 41
Guía Visual de inicio (continuación) RECORD RECORD PASO 9: SELECCION FORMATO Y CALIDAD Usando el botón SEL en el frontal de la unidad, seleccione el formato en el que desea grabar. Pulse el botón repetidas veces hasta que la luz LED light se ilumine en el formato y calidad deseados.
Seite 42
Guía Visual de inicio (continuación) RECORD RECORD PASO 10: PULSE REC PARA EMPEZAR! Cuando esté preparado para empezar la grabación, pulse el botón REC en el frontal de la unidad. Una vez el botón REC se pulse, todos los LED se encenderan por un momento para mostrar que la orden se ha recibido.
Seite 43
Guía Visual de inicio (continuación) RECORD RECORD PASO 11: PULSE REC PARA PARAR! Cuando esté preparado para detener la grabación, pulse el botón REC de la izquierda de la unidad. Usted DEBE termi- nar la grabación de esta forma, o el fichero no se almace- nará.
Seite 44
Guía Visual de inicio (continuación) RECORD RECORD PASO 12: EXTRACCIÓN DE UNIDAD USB Usted debe mantener apretado el botón REC durante 3 segundos antes de desconectar la unidad USB. Los LED parpadearán 3 veces en linea mostrando que ahora es seguro el quitar la memoria USB.
Dependiendo del software que tenga instalado en su PC, usted puede tener varias aplicaciones que permitan reproducir los ficheros de audio o editarlos. Si este es el caso, haga click derecha en cualquiera de los ficheros iKEY y seleccione una apli- Figura A - Elija Abrir carpeta usando Windows Explorer.
Seite 46
PC’s antes de hacer cambios. trar en http://claudiosoft.online.fr/wavsplit.html. NOTE QUE ESTE SOFT WARE NO TIENE NADA QUE VER CON GCI O IKEY AUDIO, Y SI LO UTILIZA ES BAJO SU - Guarde siempre copias del original por si los cambios realizados posteriormente no son satisfactorios.
LEDS INDICADORES DE BATERIA BAJA, UNIDAD LLENA Y OCUPADO: Otros indicadores LED muy utiles son los de BATERIA BAJA, UNIDAD LLENA, y OCUPADO. El indicador de BATERIA BAJA utiliza el mismo LED que el de RECORD. Sin embar- go el aviso de BATERIA BAJA SE INDICA parpadeando. Cuando su unidad de memoria se acreca al 95% llena, el iKEYplus mostrará...
(en iTunes) para que la música en iPod no se actualice automatica- mente. SI NO HACE ESTO, iTUNES BORRARA SUS GRABACIONES CUANDO SE ACTIVE. GCI Technologies y iKEY Audio no se hará responsable de perdidas de datos por procedimientos incorrectos! 1.
OK. Ver Figura D (en la próxima página). desconectar el iPod del iKEYplus, verá que los ficheros de iKEY están al final de la lista de Canciones. Si ha conectado el iPod a su PC y cargado iTunes, entonces 8.
5. Ahora, vaya de nuevo a su escritorio y doble click en la unidad etiquetada según su iPod. 6. Abra ‘iPod_Control’, luego directorio ‘Musica’, luego click en directorio (nor- malmente muy abajo) llamado ‘iKEY’. 7. Copie las grabaciones que quiera almacenar con arrastrar y soltar o usndo la fun- ción Copiar y Pegar.
Seite 51
Figura E - Abriendo la pantalla de Terminal en OSX podrá entrar el comando necesario para encontrar sus grabaciones en el iPod.
APPENDIX B SOLUCIÓN DE PROBLEMAS EN EL iKEYPLUS / PREGUNTAS FRECUENTES Si tiene algún problema con el iKEYplus, lea estas sugerencias. La mayoria de dudas pueden resolverse simplemente siguiendo los procedimientos, y asegurandose de cumplirlos palabra por palabra. Q: La grabación que he hecho es muy baja cuando la reproduzco, y no suena clara.
Seite 53
1. Asegurese de realizar completamente el sistema de Expulsión de USB ilustrado en Q: Cuando una unidad se conecta al iKEY, la función grabar no funciona y la Guia Rápida. No hacer esto, puede provocar todo tipo de errores, cualquier cosa cuando pulso el botón REC, las luces parpadean tres veces.
APÉNDICE C CONECTANDO UN GIRADISCOS AL IKEYPLUS Para conectar un giradiscos convencional al iKEYplus, deberá utilizar el cable RCA suministrado con terminal de masa. Como verá solo hay un terminal de masa en un lado, no en ambos. Para reducir ruidos, debe conectar este terminal al tornillo de masa de detrás de su giradiscos.
AC Alimentación ............120 VAC 60Hz o 230 VAC 50Hz ______________________________________________ ______________________________________________ iPod® y iTunes® son marcas registradas de Apple Computer, Inc. *La garantia establecida no afecta a las leyes de garantia locales ______________________________________________ ______________________________________________ Por favor registre su garantia en www.ikey-audio.com ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________...
- Si l'appareil ne fonctionne pas correctement malgré le respect des instruc- des cordons blindés. sédant un contact plus large que l'autre), celle-ci se connectera correctement tions d'utilisation. Ajustez uniquement les réglages préconisés dans le mode Le point d'exclamation situé dans un triangle est destiné à attirer votre à...
Introduction & Caractéristiques................57 Félicitations pour l’achat de l’enregistreur portable USB iKEYplus. Cet appareil, des- tiné à l’enregistrement, bénéficie des progrès les plus récents en matière de Pièces détachées & Accessoires fournis..............58 développement et bénéficie d’une garantie d’un an*. Avant toute utilisation, nous Schémas de connexion....................59...
Pièces & accessoires livrés avec l’appareil: RECORD RECORD 4 x Vis normales Pochette de transport 4 x Vis rapides Micro Stéréo Cordon RCA avec connecteur de mise à la terre intégré Alimentation Mode d’emploi Faces avant: Noire, Rouge & Chrome...
Branchement du Micro Stéréo au iKEYplus RECORD RECORD Côté gauche: entrée audio Côté droit: sortie audio Mini Jack 3.5mm NOTE ETTRE LE COMMUTATEUR MIC ! EN POSITION Sortie Casque Micro Stéréo (livré avec l’appareil) (Permet de contrôler le niveau audio Périphérique durant l’enregistrement)
Branchement d’une Platine Vinyle au iKEYplus* *Consultez l'Appendix E pour plus d'informations RECORD RECORD Côté gauche: entrée audio Côté droit: sortie audio NOTE ETTRE LE COMMUTATEUR EN POSITION HONO Platine Vinyle (Type standard, cellule Sortie Casque magnétique, non pré-amplifiée) (Permet de contrôler le niveau audio Périphérique...
Branchement d’une Console de Mixage* au iKEYplus *Enregistrer à partir d’une console de mixage peut nécessiter des cordons audio particuliers RECORD RECORD (Non livrés avec l’appareil) & dépendant de la marque. Côté gauche: entrée audio Côté droit: sortie audio NOTE ETTRE LE COMMUTATEUR EN POSITION...
Branchement d’un Amplificateur pour Guitare* au iKEYplus *Enregistrer à partir d’un amplificateur pour guitare peut nécessiter des cordons audio particuliers RECORD RECORD (Non livrés avec l’appareil) & dépendant de la marque. Côté gauche: entrée audio Côté droit: sortie audio NOTE ETTRE LE COMMUTATEUR EN POSITION...
Branchement d’un Microphone au iKEYplus RECORD RECORD Mini Jack 3.5mm Côté gauche: entrée audio Côté droit: sortie audio NOTE ETTRE LE COMMUTATEUR MIC ! EN POSITION Sortie Casque Microphone main (Non livré avec l’appareil) (Permet de contrôler le niveau audio Périphérique durant l’enregistrement)
OU d’une platine vinyle, vous devez brancher cet appareil aux entrées RCA en respectant le schéma ci-contre. Si vous enregistrez en utilisant un microphone, celui-ci doit être branché au Mini-Jack 3.5mm. Vous trouverez plus d’informations dans les schémas de branchements précédents ce paragraphe.
Seite 65
Guide Visuel de Démarrage Rapide (Suite) RECORD RECORD ETAPE 3: SELECTION DE LA SOURCE ! Si vous enregistrez à partir d’une source de NIVEAU LIGNE, positionnez le commutateur en position LN (A l’extrême gauche). Si vous enregistrez à partir d’une PLATINE VINYLE, mettez le commutateur en position PH (Position centrale).
Seite 66
Guide Visuel de Démarrage Rapide (Suite) RECORD RECORD ETAPE 5: BRANCHEMENT D’UN CASQUE OPTION Si vous souhaitez contrôler la qualité du signal qui sera enreg- istré avec l’iKEYplus, branchez un casque au Mini Jack 3.5mm (Sortie casque). Le signal fournit par cette sortie peut être très élevé, prenez les précautions nécessaires lors de l’utilisation de cette dernière.
Seite 67
Guide Visuel de Démarrage Rapide (Suite) RECORD RECORD ETAPE 7: MISE EN ROUTE DE LA SOURCE Afin de régler correctement le niveau d’enregistrement de l’iKEYplus, il est néces- saire de démarrer la lecture de la source à enregistrer. Si vous enregistrez en util- isant un microphone, faîtes un essai dans la même configuration que durant l’en- RECORD RECORD...
Seite 68
Guide Visuel de Démarrage Rapide (Suite) RECORD RECORD ETAPE 9: SELECTION DU FORMAT & DE LA QUALITE AUDIO Utilisez la touche SEL située à droite sur la face avant de l’appareil, pour sélec- tionner le format d’enregistrement désiré. Appuyez sur la touche jusqu’à ce que la LED du format &...
Seite 69
Guide Visuel de Démarrage Rapide (Suite) RECORD RECORD ETAPE 10: DEMARRAGE DE L’ENREGISTREMENT ! Lorsque vous souhaitez démarrer l’enregistre-ment, appuyez sur la touche REC située à gauche sur la face avant de l’ap- pareil. Lorsque vous avez appuyé sur la touche REC, toutes les LEDs s’allumeront brièvement indiquant que l’appareil a validé...
Seite 70
Guide Visuel de Démarrage Rapide (Suite) RECORD RECORD ETAPE 11: ARRET DE L’ENREGISTREMENT ! Lorsque vous souhaitez stopper l’enregistrement, appuyez sur la touche REC située à gauche sur la face avant de l’appareil. Vous DEVEZ stopper l’enregistrement en respectant cette procédure, sinon le fichier ne sera pas sauvegardé.
Seite 71
Guide Visuel de Démarrage Rapide (Suite) RECORD RECORD ETAPE 12: DECONNEXION DU PERIPHERIQUE USB Vous devez maintenir enfoncée la touche REC durant 3 secondes avant de débrancher le périphérique USB. Toutes les LEDs s’allumeront simultanément & rapidement 3 fois, indiquant que vous pouvez l’enlever en toute sécurité. NE PAS RESPECTER CETTE PROCEDURE LORS DU RETRAIT DU PERIPH- ERIQUE USB PEUT ENDOMMAGER IRREMEDIABLEMENT LES DONNEES DE VOTRE ENREGISTREMENT.
Vous remarquerez les fichiers enregistrés par votre iKEYplus car affichant Guide Visuel de Démarrage Rapide (Pages 7-14), connectez votre périphérique USB le nom iKEY, ainsi que le format de compression et le numéro d’enregistrement. Par à votre ordinateur exemple, iKEY_mp3_2 signifie qu’il s’agît d’un fichier MP3 et que c’est le troisième fichier enregistré...
Seite 73
à 3 heures par fichier. A ce jour, un utilitaire gratuit nommé Wave Splitter per- Si vous souhaitez en apprendre plus sur l’audio numérique, nous vous suggérons le met de divi-ser les fichiers WAV en fichiers plus légers, et peut être téléchargé: livre de Chris Middleton, intitulé: Complete Guide To Digital Audio (Guide Complet http://claudiosoft.online.fr/wavsplit.html.
RECORD. L’état LOW BATTERY (PILES FAIBLES) est signalé lorsque la LED clig- note. Lorsque le périphérique de stockage est rempli à plus de 95%, l’iKEYplus signalera DEVICE FULL (PÉRIPHÉRIQUE PLEIN) en faisant clignoter toutes les LEDs de façon continue, jusqu’à ce que le périphérique de stockage soit complètement rem- pli.
LE NON RESPECT DE CETTE PROCÉDURE PEUT ENTRAÎNER L’EFFACE- MENT DE VOS ENREGISTREMENTS PAR iTUNES LORSQUE VOUS LANCEZ CE DERNIER. Les Sociétés GCI Technologies & iKEY Audio ne peuvent être tenues pour responsable en cas de perte de données liée à un non respect de la procédure !
Cela signifie que l’iPod finalise & installe le fichier l’ordinateur. afin de pouvoir le lire à partir de ce dernier. Notez que plus il y a de morceaux dans votre iPod, plus ce processus sera long.
Entrée) killall Finder (Appuyez sur la touche Entrée) Figure D - Afin d’accéder aux fichiers enregistrés, vous devez Lorsque vous aurez effectué cette procédure, vous ne verrez plus jamais de fichiers demander à Windows d’afficher les dossiers & fichiers cachés.
Seite 78
Figure E - Ouvrez la fenêtre Terminal, dans OSX, qui vous permet de modifier les commandes afin de récupérer les enregistrements situés sur un iPod.
APPENDIX B PROBLEMES RENCONTRÉS / QUESTIONS FRÉQUENTES: Si vous rencontrez des difficultés avec votre iKEYplus, lisez les suggestions suivantes. La majorité des problèmes peut être résolue en reprenant les procédures et en les répétant précisemment. Q: Le niveau de l’enregistrement effectué est trop bas lors de la lecture, et le son n’est pas clair.
Seite 80
2. Un autre problème potentiel survient lorsque les fichiers WAV ont une taille 1. Votre périphérique de stockage est incompatible avec l’iKEYplus. Seuls les supérieure à 2 GB (Plus de 3 heures d’enregistrement). Ils sont incompatibles avec périphériques plug & play, ne nécessitant pas de driver, sont compatibles. Notez la majorité...
à l'une des vis amovibles de la face avant du iKEYplus. Certaines platines vinyles récentes intègrent un pré-amplificateur phono et délivrent ainsi directement un niveau ligne plus élevé. Si vous n'êtes pas certain que votre pla- tine vinyle possède un pré-amplificateur phono et si vous trouvez que le son enreg- istré...
______________________________________________ iPod® & iTunes® sont des marques déposées par Apple Computer, Inc. *La garantie établie n’est pas affectée par les garanties localement en vigueur. ______________________________________________ ______________________________________________ Merci d’enregistrer la garantie de votre appareil sur www.ikey-audio.com ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________...
Herstellers ausgeführt werden. Nutzen Sie dazu ein vom Hersteller emp- Auswirkungen führen. fohlenes Montageset. ÜBERLASTUNG: Überlasten Sie keine Steckdosen, Verlängerungskabel oder BITTE UNBEDINGT VOR BENUTZUNG DES GERÄTS LESEN! MOBILE UNTERLAGEN: Bewegen Sie eine Kombination aus dem Produkt Sicherungen. Das kann zu Bränden oder elektrischen Schlägen führen. WICHTIGE HINWEISE UND SICHERHEITSANWEISUNGEN und einer mobilen Unterlage mit Vorsicht.
iKEYplus TRAGBARER USB REKORDER INHALTSVERZEICHNIS: Warn- und Sicherheitshinweise..................83 EINFÜHRUNG: Einführung, Ausstattung....................84 Glückwunsch zu deiner Entscheidung für einen tragbaren iKEYplus USB R EKORDER Diese nächste Generation der Aufnahmegeräte bietet den letzten Stand der Technik Teileliste und Zubehör....................85 und ist mit einer limitierten 1-Jahres-Garantie * versehen. Bevor du den iKEYplus in Anschlussdiagramme....................86 Betrieb nimmst, empfehlen wir dir, die Bedienungsanleitung aufmerksam zu lesen.
Lieferumfang Teileliste & Zubehör: RECORD RECORD 4 x Normalschrauben Transporttasche 4 x Rändelschrauben Stereomikrofon Cinch-Kabel mit zusätzlicher Erdungsklemme Netzteil Bedienungsanleitung Schwarze, Rote & Chrom-Frontplatten...
Das mitgelieferte Stereo-Mikrofon an den iKEYplus anschließen RECORD RECORD Linke Seite: Audioeingang Mikrofoneingang Rechte Seite: Audioausgang CHTUNG IESER CHALTER “MIC” MUSS IN DER POSITION ” STEHEN Kopfhörer Stereomikrofon (im Lieferumfang enthalten) (optional zur Kontrolle während der Aufnahme) Speichermedium...
Plattenspieler an den iKEYplus anschließen* *Siehe Anhang E für weitere Informationen RECORD RECORD Linke Seite: Audioeingang Rechte Seite: Audioausgang Cinch-Buchsen CHTUNG IESER CHALTER “PH” MUSS IN DER POSITION ” STEHEN Kopfhörer Plattenspieler (optional zur Kontrolle (Standardmodel, Magnettonab- während der Aufnahme) Speichermedium nehmer, ohne Vorverstärker)
Einen Mixer* an den iKEYplus anschließen *je nach Mixer kann es sein, dass du für die Aufnahme RECORD RECORD andere Kabel benötigst (nicht im Lieferumfang) Linke Seite: Audioeingang Rechte Seite: Audioausgang Cinch-Buchsen CHTUNG IESER CHALTER “LN” MUSS IN DER POSITION ”...
Einen Gitarrenverstärker* an den iKEYplus anschließen *je nach Verstärker kann es sein, dass du für die Aufnahme RECORD RECORD andere Kabel benötigst (nicht im Lieferumfang) Linke Seite: Audioeingang Rechte Seite: Audioausgang Cinch-Buchsen CHTUNG IESER CHALTER “LN” MUSS IN DER POSITION ”...
Ein Handmikrofon an den iKEYplus anschließen RECORD RECORD Mikrofoneingang Linke Seite: Audioeingang Rechte Seite: Audioausgang CHTUNG IESER CHALTER “MIC” MUSS IN DER POSITION ” STEHEN Handmikrofon Kopfhörer (nicht im Lieferumfang) (optional zur Kontrolle während der Aufnahme) Speichermedium...
Zeichnung in den Batterieschacht ein. Alternativ kannst du auch das mitgelieferte 9 V DC Netzteil ver- wenden. Wenn du wiederaufladbare Batterien verwendest, wer- den diese aufgeladen, sobald der iKEY eingeschaltet wird. WENN DU ALKALI ODER KEINE WIEDERAUFLADBAREN BATTERIEN VERWENDEST, DARF DAS NETZTEIL NICHT...
Schnellstart-Anleitung (Fortsetzung) RECORD RECORD SCHRITT 3: DEN SCHALTER EINSTELLEN! Wenn du ein LINE-SIGNAL aufnimmst, stell den Schalter auf LN (ganz nach links). Wenn du ein PHONO-SIGNAL von einem Plattenspieler aufnimmst, stell den Schalter auf PH (mittlere Position). Nimmst du mit einem MIKROFON auf, muss der Schalter ganz nach rechts auf MIC gestellt werden.
Schnellstart-Anleitung (Fortsetzung) RECORD RECORD SCHRITT 5: KOPFHÖRER ANSCHLIESSEN OPTIONAL Wenn du das Signal, das gerade mit dem iKEYplus aufgenom- men wird, kontrollieren möchtest, kannst du ganz einfach Kopfhörer an die 3,5-mm-Kopfhörerklinkenbuchse anschließen. Sei Vorsichtig, denn das Signal, dass aus dem Kopfhörerausgang kommt, kann sehr laut sein.
Schnellstart-Anleitung (Fortsetzung) RECORD RECORD SCHRITT 7: AUDIOSIGNAL STARTEN Um den Aufnahmepegel am iKEYplus einstellen zu können, ist es notwendig, dass du die Wiedergabe des Signals, das du aufnehmen willst, startest. Bei der Aufnahme mit einem Mikrofon solltest du in der gleichen Lautstärke in das Mikrofon RECORD RECORD sprechen, mit der du auch später aufnehmen willst.
Schnellstart-Anleitung (Fortsetzung) RECORD RECORD SCHRITT 9: FORMAT UND QUALITÄT Mit dem SEL-Button auf der linken Oberseite wählst du das Aufnahmeformat. Drück den Button so oft, bis die LED des gewünschten Formats/Qualität leuchtet. Nach 3 Sekunden geht die LED aus und kehrt in die Pegelanzeige Betriebsart zurück.
Seite 96
Schnellstart-Anleitung (Fortsetzung) RECORD RECORD SCHRITT 10: AUFNAHME - REC DRÜCKEN! Wenn du mit den Aufnahmevorbereitungen fertig bist, drück den REC Button auf der linken Oberseite. Nachdem du den REC Button gedrückt hast, leuchten alle LEDs kurz auf, um anzuzeigen, dass der iKEYplus den Befehl verstanden hat.
Seite 97
Schnellstart-Anleitung (Fortsetzung) RECORD RECORD SCHRITT 11: DRÜCK RECORD ZUM STOPPEN! Wenn du die Aufnahme beenden willst, drück den REC Button auf der linken Oberseite erneut. Du MUSST die Aufnahme auf diese Art und Weise beenden, da die Daten sonst nicht gespeichert werden. Nachdem du den REC Button gedrückt hast, leuchten alle LEDs kurz auf, um zu zeigen, dass der iKEYplus den Befehl verstanden hat.
Schnellstart-Anleitung (Fortsetzung) RECORD RECORD SCHRITT 12: USB-GERÄT ENTFERNEN Um das USB-Speichermedium vom iKEYplus zu trennen, musst du vorher den REC Button für 3 Sekunden gedrückt halten. Die LEDs leuchten dreimal hintereinander und zeigen, dass nun das USB-Gerät entfernt werden kann. HALTE DICH GENAU AN DIESE VORGEHENSWEISE, DA ES SONST ZU BESCHÄDIGTEN DATEN ODER KOMPLET- TEM VERLUST DEINER AUFNAHMEN KOMMEN KANN.
Wenn du die Option “Ordner öffnen, um Dateien anzuzeigen mit Windows ABSPIELEN DEINER AUFNAHMEN AUF EINEM COMPUTER MIT WINDOWS XP: Explorer” gewählt hast, wirst du einige Dateien in einem neuen Fenster sehen, ähn- Wenn du die Aufnahme, wie in der Schnellstart-Anleitung beschrieben (Seite 7-14) lich wie in Abbildung B.
Mit dem entsprechenden Wissen kannst du das Beste aus den Aufnahmen holen. Da der iKEYplus ohne Software geliefert wird, findest du hier eine Liste von Software zum Bearbeiten, die das Entwicklerteam von iKEY AUDIO empfiehlt. (Stand zum Zeitpunkt der Erstellung dieser Anleitung!) Audacity ist eine kostenlose Cross-Platform Audio Editing Software für Windows und...
LOW BATTERY, DEVICE FULL UND BUSY LED ANZEIGE: Du solltest die zusätzlichen LED Anzeigen für LOW BATTERY, DEVICE FULL und BUSY beachten. Die LOW BATTERY Anzeige wird auch über die RECORD LED angezeigt. Wenn diese LED blinkt, haben die BATTERIEN ZU WENIG LEISTUNG und müssen getauscht werden.
Zu allererst, noch bevor du mit dem iKEYplus arbeitest, MUSST du die Einstellungen deines iPods (in iTunes) ändern, sodass Musik nicht mehr automatisch upgedated wird. GESCHIEHT DAS NICHT, LÖSCHT iTUNES BEIM START ALLE AUFNAHMEN. GCI Technologies und iKEY Audio übernehmen keine Verantwortung, wenn dieser Vorgang nicht ordnungsgemäß durchgeführt wird.
OK (siehe Abbildung D auf der nächsten Seite). hast, findest du die aufgenommenen Daten in der Songliste auf deinem iPod. Wenn du den iPod gerade erst vom iKEYplus getrennt hast, wirst du die iKEY Daten ganz 8. Such den Ordner ‘iPod Control’ und öffne ihn mit Doppelklick.
Laufwerk, das zu deinem iPod gehört. 6. Geh als Nächstes auf den Desktop und öffne den Ordner “iPod_Control” und dort den Ordner “Musik”. Klick auf den Ordner “iKEY” (normalerweise ganz unten). 7. Kopiere die gewünschten Aufnahmen mit Drag&Drop oder Copy&Paste auf deine Festplatte.
Seite 105
Abbildung E - Öffne das Terminal Fenster in OSX, um die nötigen Kommandos einzugeben und die Aufnahmen vom iPod abzurufen.
ANHANG B PROBLEMBESEITIGUNG BEIM iKEYPLUS / FAQ- HÄUFIG GESTELLTE FRAGEN Solltest du Schwierigkeiten mit deinem iKEYplus haben, lies dir die folgenden Lösungsvorschläge durch. Die meisten Punkte können einfach durch Wiederholung des Vorgangs, genau wie beschrieben, gelöst werden. F: Die Aufnahme, die ich gemacht habe, ist beim Abspielen zu leise und klingt verschwommen.
Seite 107
PROBLEMBESEITIGUNG BEIM iKEYPLUS / FAQ- HÄUFIG GESTELLTE FRAGEN F: Mein iKEYplus arbeitet nicht mit dem iPod wie beschrieben zusammen. 1. Es könnte sein, dass der iPod oder iTunes nicht richtig konfiguriert sind oder dass ORTSETZUNG der iPod eine alte Firmwareversion hat. Schau im ANHANG A: “ARBEITEN MIT DEM APPLE iPOD ALS SPEICHERMEDIUM FÜR DEN iKEYplus”.
ANHANG C EINEN HERKÖMMLICHEN PLATTENSPIELER AN DEN IKEYPLUS ANSCHLIEßEN Benutze das mitgelieferte Cinch-Kabel mit zusätzlicher Erdungsklemme, um einen herkömmlichen Plattenspieler an den iKEYplus anzuschließen. Wie du sicher fest- gestellt haben wirst, gibt es nur auf einer Seite des Kabels eine Erdungsklemme. Um etwaiges Brummen zu vermeiden, muss die Klemme unter dem rückseitigen Erdungsanschluss des Plattenspielers befestigt werden.