Melissa 16670084 Gebrauchsanweisung Seite 20

USE
1. Brush the hair or beard with the comb (9).
2. Place the required guide comb (4, 5) on
the appliance so that it clicks securely over
the blade (3). Make sure to turn the guide
comb correctly so that you cut the hair at
the required length.
3. Switch on the appliance using the on/off
button (1).
4. Cut the hair or trim the beard. Make sure
that the guide comb is flat against the
base of the head or the cheek.
5. Regularly shake hair or beard cuttings out
of the appliance to prevent the blade from
becoming blocked.
6. Always switch the appliance off using the
on/off button when you have finished using
it.
CLEANING
When cleaning the appliance, you should pay
attention to the following:
• Turn off the appliance and unplug it before
cleaning.
• Tilt the blade out of the appliance.
• Brush the blade using the cleaning brush
(7) supplied to remove hairs.
• Lubricate the blade with a few drops of oil
(8).
• Tilt the blade back again and click it
securely onto the appliance. Switch the
appliance on and let it run a few seconds
to distribute the oil into the blade.
• Do not submerge the appliance in water,
and do not let water enter the appliance.
• Clean the appliance by wiping it with a
damp cloth. Do not use detergents of any
kind.
UK
20