Westfalia 82 63 66 Bedienungsanleitung Seite 2

Safety Notes
 Make sure not to injure yourself while disassembling the old belt
winder. The drum is under tension.
 Do not allow children to play with the belt winder.
Using
1. Close the shutter completely before
disassembling the old belt winder.
2. Release the shutter from the drive shaft.
3. Mount the new belt winder on the wall
or on the window frame.
4. Pull out approx. 3.5 m belt from the
winder and slide the belt through the
belt guide and into the roller shutter box.
Fasten the end of the belt.
5. Turn the drive shaft in order to wind the belt on the belt pulley.
Please observe the correct rotating direction. Finally mount the
shutter on the shaft.
Cleaning
 When pulling the shutter up or down, make sure your hands are
clean in order not to soil the belt.
 Clean the belt winder with a lightly moistened cloth only.
Aggressive cleaning agents may damage the surface.
Design protected by copyright
Instruction Manual
4 Pcs Shutter Belt Winder Set
Article No. 82 63 66
© Westfalia 04/12