Limited Warranty; End Of Product Life; Troubleshooting - Cuda surgical LLS-2000 Gebrauchsanleitung

8.2 LIMITED WARRANTY

Your LED light source carries a 3-years warranty from the date of shipment on
workmanship and all defects of material. Should your product prove to have such defects
within 3 years of the shipment. ST TECHNOLOGIES
component part without charge. Should your LED Light Source product(s) need servicing
under this warranty, please contact, ST TECHNOLOGIES
documentation. You should carefully pack unit in a sturdy carton and ship it to the factory.
Please include a note describing the defects, your name, telephone number and a return
address. Warranty does not cover equipment subject to misuse, accidental damage,
normal wear and tear or if transferred to a new owner without authorization from,
ST TECHNOLOGIES
other rights that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to
the factory. Your product will be inspected and an estimate of repair charges will be submitted
to you for approval. Payment must be received before repairs are completed.
In the US:
•
Customer Service
•
10.

END OF PRODUCT LIFE

In accordance with the European Waste from Electrical and Electronic Equipment (WEEE)
directive, we encourage our customers to recycle this product whenever possible. Disposal
of this unit must be performed in accordance with the applicable local environmental
regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to
manufacturer at the end of product life.
11.

TROUBLESHOOTING

Problem
The power indicator (refer
to 4.1) is not lit.
The power indicator is lit,
but lamp will not ignite.
®
LIT168 CUDA SURGICAL
(English)
. This warranty gives you specific legal rights and you may also have
®
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit fuses. If necessary, replace.
Turn intensity control knob clockwise to increase light
output intensity
will repair or replace the product or
®
®
877-814-2237 (toll free)
904-208-2291
Date of Revision:08/02/16
return authorization
Rev. C
Page 11 of 60