sauermann SI-CA 120 Kurzanleitung Seite 4

2 ON / OFF
During autozero DO NOT insert the gas probe
in the chimney.
Keep pressed for 2 seconds until it beeps
3 Select the required Language
Press then go to 'Languages' with
Scroll through the available languages with
Press to set the selected language.
4 Select the required Measurement Units
Press , go to 'Analysis' then 'Measurement units' with
Scroll through the required parameter to set with
then press
Select the required unit with
5 Memory
Si-CA 120 :
and
and
and then press
It saves the value,
acquired or entered
in the parameter
'Air T'.
Acquires the
temperature value
detected from the
sampling probe. That
value is reported in
the parameter 'Air T'.