JBL SPOT Benutzerhandbuch Seite 4

jbl spot easy setup guide
™
Step 1. Unpack the JBL Spot sub-
woofer, satellites, power adapter
and input cable. Read these
instructions completely.
Step 5. Plug the power adapter
into a wall outlet or power strip.
Document Number: 950-0158-001
Step 2. Plug the left and right
satellites into position on the
rear of the subwoofer.
Step 6. Press the Power button
on the back of JBL Spot. A green
LED will light when the JBL Spot
system is on.
Step 3. Connect the audio input
cable to the rear of the sub-
woofer. Connect the audio cable
to the audio source.
-
+
Step 7. Adjust the volume using
(+) to increase and (–) to decrease.
Press both to mute JBL Spot. Press
either button to unmute.
4 4
Step 4. Connect the power adapter
plug into the position marked on
the rear of the subwoofer.
Step 8. Adjust bass level by turning
the Bass-Level knob on the rear of
the subwoofer.
Description: JBL Spot Manual