Olympus Camedia C 730 Ultra ZOOM Anleitung Seite 42

PLAYBACK (Cont.)
En Playback on a TV
Mode dial
setting
1
Make sure that the TV and camera power are off .
2
Connect the camera to the TV using the AV cable.
Connect to the TV's video
input (yellow) terminal and
sound input (white)
terminmal
3
Set the mode dial to
the video input mode.
● For details on switching to video input, refer to your TV's instruction
manual.
4
Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
● Make sure that the camera's video output signal type is the same as the
TV's video signal type.
42
AV cable
Connect to the A/V OUT jack.
. Turn on the camera and the TV. Set the TV to
Note
Mode dial