Operation; Control Panel; Ventilation Requirements - AEG SCB61826NS Benutzerinformation

26 www.aeg.com
Climate
class
T
Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only
be guaranteed within the
specified temperature
range. If you have any
doubts regarding where to
install the appliance, please
turn to the vendor, to our
customer service or to the
nearest Authorised Service
Centre.
3.3 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a

4. OPERATION

4.1 Control Panel

Display
1
Freezer Temperature warmer button
2
Freezer Temperature colder button
3
OK
4
Mode
5
Fridge Temperature warmer button
6
Ambient temperature
+16°C to + 43°C
8 7
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.

3.4 Ventilation requirements

The airflow behind the appliance must
be sufficient.
5 cm
CAUTION!
Refer to the assembly
instructions for the
installation.
1
6 5 4 3
Fridge Temperature colder button
7
ON/OFF
8
It is possible to change predefined
sound of buttons by pressing together
Mode and temperature colder button for
a few seconds. Change is reversible.
min.
2
200 cm
min.
2
200 cm
2