Bluetooth Connection - Mifa A1 Bedienungsanleitung

06
Ports Functions
Micro-SD card slot
In the powered-on state, insert a Micro-SD card into the slot. It will
play the music stored in the card automatically after two beeps.
Micro USB port
• Charging: use a DC 5V / 1A adaptor or connect it to a
computer to charge the speaker
• Data transmission: in the powered-off state, insert a Micro-
SD card and then connect it to a computer. It will turn on and
you can manage music files in the card on the computer.
Aux-in jack
In the powered-on state, insert an audio cable. It
will beep to indicate a successful connection.
07
English

Bluetooth Connection

1. Press and hold the power button for more than 2
seconds until it beeps and the blue LED light flashes.
2. Turn on the Bluetooth of your device and select
Mifa_A1. Once the connection is completed, the speaker
will beep and the blue LED light will stay on.
Note1. The speaker will connect to the last-connected
device automatically once the device's Bluetooth is
turned on.
Note2. The operating range is about 10m / 33 feet and will
be influenced by the surroundings.
Other Instructions
To connect to another device, press and hold the volume down and volume up buttons simultaneously for
more than 2 seconds. The paired one will be disconnected and the speaker will enter the pairing mode.
To reconnect it to the last used device, short press the power button.
English