General Instructions And Symbols - STUWE Typ IS Gebrauchs- Und Bedienungsanleitung

1. General Instructions and Symbols

The installation instructions must be
carefully read before installing and com-
missioning a STÜWE internal locking unit
type IS. Instructions and danger warnings
are separately marked and special atten-
tion must be paid to them.
Meaning of the symbols in these
installation instructions:
DANGER
Danger
The signal word indicates an imme-
diate danger with a high level of risk
which, if it is not avoided, will lead to
death or a severe injury.
WARNING
Warning
The signal word indicates a possible
threat of danger with a medium level
of risk which, if it is not avoided, may
lead to death or a severe injury.
ATTENTION
Attention
The signal word indicates a danger
with a low level of risk which, if it is
not avoided, may lead to a minor or
slight injury.
NOTE
Note
The signal word indicates a possibly
dangerous situation which may lead
to damage to material or the environ-
ment.
These installation instructions apply on
condition that the internal locking unit
meets the selection criteria for its proper
use. The selection and arrangement of the
internal locking unit do not form a part of
these installation instructions.
These installation instructions must be
carefully retained and must passed on if
the internal locking unit is transferred, be it
individually or as part of a machine.
All information and notes in these instruc-
tions for use and operation are given to
the best of our knowledge while taking
into account our previous experience and
intelligence. The original version was cre-
ated in German and checked by STÜWE.
No reproduction is permitted without the
written approval of STÜWE.
[ EN ]
17