Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Introduction
Dear customer,
We would like to congratulate you for getting your new soldering gun!
With this choice you have chosen a product which
combines good design and practical technical features.
Please read the following advice carefully and work
accordingly to these advice to get troubleless fun with
the unit.
Features
Soldering gun to solder and desold electrical and electronical
components at printed circuits and modules. To tin-plate
conducting paths and wires. Ideal for electronic works or
hobby electronics.
Safety Device
Use this iron with caution!
Unqualified and careless use cause heavy hurts or fire.
Interrupt power source when you do not work with the iron.
Do not put the needle on the table or other heat unresistant surfaces.
Please use a heat resistant standing unit for soldering irons.
Do not leave the system unattended when the needle is hot.
While using the device for the first time there may be some smoke or smell which is normal
This is normal and is getting off at the 3-5 use the system.
Please remember that soldering tin contents toxic lead components
The arising smoke is toxic
Therefore take care of a good ventilation and do not eat while soldering
Keep the system away from children!
Operating:
After connecting the power plug, the control lamp at the back of the soldering gun is lightning.
To raise the temperature from 30 Watt up to 130 Watt the push the
button at the grip of the soldering gun.
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung Stand 01/2019
Owner's Manual
Soldering Gun „LP-100"
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig
Specifications:
Power Input: 200 – 240V AC
Rating: 30 – 130Watt
Dimensions LxWxD: 180 x 22 x 107mm
Weight: 160g
1540012
Werbung
