Herunterladen Diese Seite drucken

Avinity 00107630 Bedienungsanleitung Seite 4

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
G Operating instruction
Avinity: High Performance Accessories – born of a
passion for audio/video entertainment. High-qual-
ity workmanship and performance emphasise our
commitment to premium accessories.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
»ATP-507« Stereo Audio Preamplifier to connect
record players with magnetic pick-up systems to
high-level inputs. Record players are no longer com-
patible with many of the new stereo amplifiers. The
»ATP-507« preamplifier also allows the use of nor-
mal high-level inputs (LINE, AUX, CD, Tuner, Tape,
etc.) as an extra record player input. The»ATP-507«
features built-in RIAA equalisation. We recommend
using the AVINITY® REFERENCE CLASS phono RCA
cable.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with
a dangerous voltage of sufficient magnitude to
constitute a risk of electric shock.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards and
risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• Stereo-phono Preamplifier
• power supply, 230 V, 500 mA
• RCA cable, 2 plugs – 2 plugs
• These operating instructions
3. Safety Notes
• The product is intended for private, non-
commercial use only.
• Use the product for its intended purpose only.
• Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Do not use the product in moist environments and
avoid splashes.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to
any major shocks.
• Do not operate the product outside the power
limits given in the specifications.
• Do not open the device or continue to operate it if
it becomes damaged.
• Connect the product only to a socket that has
been approved for the device. The electrical socket
must always be easily accessible.
• Dispose of packaging material immediately
according to locally applicable regulations.
Risk of electric shock
• Do not open the device or continue to operate it
if it becomes damaged.
• Do not use the product if the AC adapter, the
adapter cable or the mains cable are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
4. Operation
Warning
• Connect the product only to a socket that has
been approved for the device. The socket must
be installed close to the product and must be
easily accessible.
• Disconnect the product from the network using
the power button – if this is not available,
unplug the power cord from the socket.
• When using a multi-socket power strip,
make sure that the sum power draw of all the
connected devices does not exceed its maximum
throughput rating.
• If you will not be using the product for a long
period of time, disconnect it from mains power.
Note
• Ensure correct polarity when using a plug-in
mains adapter, otherwise the device could be
damaged.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not bend or crush the cable.
• Connect the left and right channel of the record
player with the corresponding left and right
channel of the preamplifier input (MM/Input).
• Check that the record player has a magnetic pick-
up. Any separate chassis earthing cable on the
record player must be connected to the additional
screw at the back of the device.
• Connect the left and right channel of the
preamplifier output with the corresponding left
and right channel of the stereo amplifier input
(LINE, AUX, CD, Tuner, Tape, etc.).
• Then connect the »PA-506« preamplifier to
power supply. The record player and amplifier can
now be used in the customary manner. Please

Werbung

loading